3Com Wireless LAN Controller WX2200 User Manual page 158

158 C 7: M
HAPTER ANAGING AND
M Y
ONITORING OUR
SSH—By default, SSH is enabled. You can use SSH for encrypted
access to the CLI.
SNMP—By default, SNMP is disabled. You can configure SNMP
community strings and User Security Model (USM) users, notification
profiles, and notification targets.
Logging—The system log provides event information for monitoring
and troubleshooting. You can send the log information to a local data
buffer on a WX, to the console, to a Telnet session, and to a
configured set of syslog servers.
Tracing—Tracing allows you to review diagnostic information for
debugging MSS. Tracing allows you to review messages about the
status of a specific area of MSS.
Time zone and summertime settings—You can configure the system
time and date statically. You also can configure MSS to offset the time
by an additional hour for daylight savings time or similar summertime
period.
To manage services on a WX switch
1 Select the Configuration tool bar option.
2 In the Organizer panel, click the plus sign next to the WX switch.
3 Click the plus sign next to System.
4 Select Management Services.
The management services and their settings appear in the Content panel.
5 Use the Content panel and Task List options to modify settings.
(For information about the management options, see the "Viewing and
Changing Management Settings" section in the "Configuring WX
System Parameters" chapter of the
Reference Manual.)
N
ETWORK
Wireless LAN Switch Manager