3Com Wireless LAN Controller WX2200 User Manual page 61

Table 10 3Com VSAs (continued)
Attribute Type
End-Date 26, 43, 7
Start-Date 26, 43, 7
URL 26, 43, 8
4 Configure each user record with authorization rules (username and
password) and with either the Vlan-Name attribute (3Com VSA) or the
RADIUS Tunnel-Private-Group-ID to assign users to VLANs.
Other attributes are optional.
Create a Service Profile for 802.1X Access
A service profile contains the configuration for the service you want to
offer, such as employee access, guest access, or VoWIP.
For more information about service profiles, see "Wireless
Configuration" on page 36. For more information about service sets, see
"Which Services To Provide?" on page 30.
To create an 802.1X service profile
1 Select Configuration on the toolbar.
2 In the Organizer panel, expand the WX switch.
3 Expand Wireless, then select Wireless Services.
4 In the Task List panel, select 802.1X Service Profile.
The 802.1X Service Profile wizard is displayed.
Configure Employee Access Services
Rcv in Sent in Sent in
Access Access Acct
Resp? Reqst? Reqst?
Yes No No
Yes No No
Yes No No
61
Description
Date and time after which
the user is no longer
allowed to be on the
network. Use the
following format:
YY/MM/DD-HH:MM
Date and time at which
the user becomes eligible
to access the network.
Use the following format:
YY/MM/DD-HH:MM
URL to which the user is
redirected after successful
WebAAA. Use the
following format:
http://www.example.com