3Com Wireless LAN Controller WX2200 User Manual page 147

To assign channels
1 Display the floor plan in the Content panel.
2 In the Task List panel, click RF Planning.
3 Under RF Planning, click Assign Channels. The Channel Assignment
wizard appears, showing the current channel assignment constraints.
4 To change the starting floor for channel assignment, select the floor from
the Begin On Floor List. By default, 3WXM starts at the top floor and
works down.
5 To change the ending floor for channel assignment, select the floor from
the End On Floor List.
The ending floor number must be lower than or equal to the starting
floor number.
6 To change the radio type for which to assign channels, select the radio
type from the Technology list. By default, 3WXM assigns channels for all
radio types on the MAPs placed in the building.
7 To prevent 3WXM from taking the channel assignments for the floor
above into account when calculating the channel assignments for a floor,
clear Use Cross-Floor Channel Information.
8 Click Next. The Channel Assignment Progress page appears.
Plan RF Coverage 147