To determine the number and placement of MAPs
1 Display the floor plan in the Content panel.
2 In the Task List panel, click RF Planning.
3 Under RF Planning, click Compute and Place. The Compute and Place
wizard appears.
4 To remove a coverage area from MAP placement and computation, clear
the area's Compute Layout box.
5 To specify the primary wiring closet for a coverage area, click in the
Wiring Closet column to display the wiring closet list and select a wiring
closet from the list.
6 Click Next. The Coverage Area Progress page appears. Information is
shown about the number of MAPs per coverage area, and whether they
were placed based on coverage or capacity.
Plan RF Coverage
145