6.1.5 Power management setup
The power management setup controls the CPU cards' "green"
features. The following screen shows the manufacturer's default
values.
Power Management
PM Control by APM
Video Off Method
Video Off After
Suspend Mode
HDD Power Down
PCI/VGA Act-Monitor
MODEM Use IRQ
Figure 6-5: Power management setup screen
Power Management
This option allows you to determine if the values in power manage-
ment are disabled, user-defined, or predefined.
HDD Power Management
You can choose to turn the HDD off after one of the time intervals
listed, or when the system is in Suspend mode. If in a power saving
mode, any access to the HDD will wake it up.
Note:
ROM PCI/ISA BIOS (2A69KAKH)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
: User Defined
: Yes
: V/H SYNC+Blank
: Suspend
: Disable
: Disable
: Disabled
: 3
The HDD will not power down if the Power Manage-
ment option is disabled.
** Reload Global Timer Events**
IRQ[3-7,9-15], NMI
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
Floppy Disk
Serial Port
Parallel Port
↑↓→←
Esc : Quit
F1 : Help
PU/PD/+/- : Modify
F5 : Old Values
<Shift>F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Chapter 6 Award BIOS Setup
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled
: Disabled
: Select Item
53