Advantech MIO-6250 MIO/160 Startup Manual

MIO-6250 MIO/160 Module with 3 LANs
Startup Manual

Introduction

The most flexible interface for Embedded
Applications
Today is an embedded world, but many standard
embedded single board computers cannot 100% meet
application specifications because they are not flexible
enough to expand and develop the system.
A system design short cut
Module I/O160 (MIO/160) is an open pin definition
interface from Advantech. The MIO/160 interface inte-
grates the most popular data buses into a high-density
160-pin connector, including, PCI, USB, DVO, SMBus,
LPC, and AC97. With MIO/160, board engineers can
speed up system project design and expand the sys-
tem easily.

Packing list

Before you begin installing your card, please make sure
that the following materials have been shipped:
• 1 MIO-6250
• 1 Startup manual
• 1 CD ROM for MIO-6250 Driver/Utility
• 1 screw kit
- copper stud x 4 pcs
- screw x 4 pcs
• 1 Mini Jumper kit (black)
- mini jumper x 10 pcs
If any of these items are missing or damaged, contact
your distributor or sales representative immediately.
Note 1: Acrobat Reader is required to view any PDF
file. Acrobat Reader can be downloaded at:
www.adobe.com/products/acrobat/
readstep2.html(Acrobat is a trademark of
Adobe.)
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://www.advantech.com/support
This manual is for the MIO-6250 series Rev. A1.
Part No. 2006625000

Specifications

• Chipset: Onboard 3 Realtek RTL8139DL 10/100BaseT
• Ethernet Port: 3 RJ-45 connector
• LAN bypass: Supports LAN bypass function on LAN 2
• Ethernet disable: LAN port can be disable by onboard
• LED indicator:

Mechanical and Environmental

• Dimensions (L x W): 102mm x 70mm
• Operating Temperature: 0 ~ 60°C operation
• Operating Humidity: 0%~90% relative humity, non-con
• Power Supply Voltage: 5V
• Power Requirements: 5V @100mA
• 3 Fast Ethernet ports
• LAN by pass function
p/n: 1930000058
• Ethernet disable function
p/n: 1935030500
p/n: 1653302122
1st Edition
May 2006
Fast Ethernet Controllers
and LAN 3 by GPO pins.
switch.
Active (Tx/Rx) LED: The LED lights "Blinking Orange"
when the respective port is successfully connected to
an Ethernet port.
Link (10/100 Mbps) LED: The LED lights "Solid Green
On" when the respective port is successfully connected
to 10/100Mbps Ethernet network device of the ports.
densing

Features

MIO-6250 Startup Manual 1