Table of Contents
Advertisement
The IRQ and address range for both ports are fixed. However, if you
wish to disable the port or change these parameters later, you can do
this in the system BIOS setup. The table below shows the settings for
the MIC-3376 board's ports:
Table 2-1: MIC-3376 serial port default settings
Port
COM1
COM2
2.7
CPU fan power supply connector (CN13)
This connector provides power to the optional CPU cooling fan. This
connector is only available when +5 V and +12 V power is supplied to
the board. However, the CPU cooling fan is not required if enough
external cooling air exists.
Warning! Before making the connection, make sure the
2.8 Ethernet Configuration (CN4 & CN5)
The MIC-3376 is equipped with dual high performance 32-bit PCI-bus
Fast Ethernet interfaces which are fully compliant with IEEE 802.3u 10/
100Base-TX specifications. It is supported by all major network
operating systems and is 100% Novell NE-2000 compatible. Two on-
board RJ-45 jacks provide convienent connection to the network.
The medium type can be configured via the software program included
on the utility CD-ROM disc. (See Chapter 3 for detailed information.)
2.9 USB Connector (CN7)
The MIC-3376 provides two USB (Universal Serial Bus) interfaces,
which give complete plug and play, hot attach/detach for up to 127
2 2
MIC-3376 User's Manual
Address
3F8, 2F8, 3E8, 2E8
3F8, 2F8, 3E8, 2E8
voltage is absolutely correct and that you have
selected the correct connector.
Default
3F8/IRQ4
2F8/IRQ3
Advertisement
Table of Contents
