Cpr Is Not Detected - Gaumard SUSIE S2000 User Manual

"RF module not found"
RF module not connected
RF module is not identified by
the computer

CPR is not detected

Compressions are not detected
The current rhythm is healthy
Compressions are not
calibrated
Ventilations are not detected
The respiratory rate is not set
to 0 per min
Ventilations are not calibrated
SUSIE® S2000 |
Connect the RF module to the USB port
Close the software and disconnect the RF
module for at least 5 seconds. Plug it back
in and restart the software
Set rhythm to an unhealthy heart rhythm
Follow the calibration procedure outlined on
page 18
Set respiration rate to zero
Follow the calibration procedure outlined on
page 18
User Guide
Scenarios
| 65