Care and Cautions Overall Warnings ....................5 General ..............................5 Storage ..............................5 Cleaning .............................. 5 Getting Started Overview........................ 7 Appearance ............................7 Simulator ............................. 7 Other..............................7 Contents ........................ 7 Terminology ......................7 Equipment Set Up Filling the Sacs............................ 9 Working with the Simulator Simulator Features .....................
Therefore, in handling the model, use the same gentle techniques as you would in working with a patient. Do not wrap this or any other Gaumard product in newsprint. Indelible marks made with ballpoint pens, ink or marker cannot be removed.
Overview The S230.7 Advanced Patient Catheterization Simulator is an advanced training tool useful to illustrate the following procedures: • Male Catheterization • Rectal Examination (Palpations) The simulator is equipped with the following features: Terminology APPEARANCE • Medium skin tone is the standard simulator color;...
FILLING THE SACS. 1. Place the Male Catheterization Simulator in the location where it will be demonstrated 2. Fill the external bladder tank with water and position it on the stand next to the simulator, ensure the clamp is tightened. 3.
One of the most important elements of nursing care is bladder catheterization, i.e. the removal of urine from the bladder by the introduction of a catheter. The S230.7 was designed with realistic features that permit bladder catheterization training. The simulator allows catheterization in the seated or recumbent position.
The valve may be turned to open in order to release air from the internal airbag. WARNING When inflating the internal airbag with the squeeze bulb, be careful to not over-inflate as this may damage the airbag. MALE CATHETERIZATION The urethra is connected to an internal urinary bladder.
Page 14
Defects in third-party products are covered exclusively by the warranty, if any, provided by the third-party. Any waiver or amendment of this warranty must be in writing and signed by an officer of Gaumard. In the event of a perceived defect in material or workmanship of the Gaumard product, the first purchaser must: Contact Gaumard and request authorization to return the Gaumard product.
Need help?
Do you have a question about the S230.7 and is the answer not in the manual?
Questions and answers