Initializing The Simulator In Uni - Gaumard SUSIE S2000 User Manual

To display the battery level, the UNI® software must first establish
a connection with the simulator. For more information about the
battery indicator, refer to "Working with UNI®" section.
WARNING: Do not store the simulator with a discharged battery. It is
good practice to re-charge the battery at the end of every simulation
session. In addition, re-charged the battery at least once every 2
months even if the simulator is not being used; permanent loss of
capacity might occur because of self-discharge.

3.1 Initializing the Simulator in UNI

The laptop operates the simulator wirelessly.
Follow the steps below to connect to UNI:
1. Plug in the RF module to the PC
2. Turn on the tablet
3. Double-click on the UNI icon
SUSIE® S2000 | User Guide
Equipment Setup
| 11