Step 15. Install Toekick; Inspect Final Installation - Monogram ZISB36 Series Installation Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

Installation Instructions - Standard Installation
STEP 15 INSTALL TOEKICKS
• Locate the supplied toekicks (shipped taped to the
side of the refrigerator.
• The narrow set of toe kicks will be used with standard
installation.
• Attach the LARGER toekick to the refrigerator using
ONLY the top center hole (1).
• Attach the toekick skirt to the refrigerator using the
three lower slots (2).
• A custom toekick can be installed to match or
1
2
complement the surrounding cabinetry. Use the
supplied toekick as a template to cut the shape.

INSPECT FINAL INSTALLATION

Check door alignment. Stand back away from the
refrigerator to inspect the final installation.
• Check to be sure the handles are evenly aligned with
each other at the top. To adjust, loosen the handle
screws and slide up or down. Tighten the screws.
• Shipping or the addition of heavy door panels may
have caused the doors to move slightly out of
alignment.
Door Out of
• If necessary, the fresh food door may be adjusted up
or down to align with the freezer door.
• Use a 5/16" wrench to adjust the hinge pin as shown.
26
Alignment
Bushing
D o o r H
i n g e
C a s e H in
g e
5/16" Wrench
Raise
31-1000450 Rev. 1

Advertisement

Table of Contents
loading

Table of Contents