Table of Contents
Advertisement
Available languages
Available languages
10
STUDIOCOB TU-DY
To able to operate the STUDIOCOB with a light controller, adjust the DMX start address for the first a
DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the STUDIOCOB.
The other functions of the light effect panel are then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
Start address
DMX Address
Next possible start
Next possible start
Next possible start
DMX channels
(example)
occupied
address for unit No. 1
address for unit No. 2
address for unit No. 3
5
33
33-37
38
43
48
DMX Address: 33
DMX Address: 38
DMX Address: 43
DMX Address: 48
. . . . . . . . . . . .
DMX512 Controller
Fig.5 - Example 5 DMX channels configuration
Advertisement
Chapters
Table of Contents
