Maintenance - Steelcase Flex Series Quick Manual

5.4 Setting the displayed desk height
 Press the buttons 1, 2 and
 The display shows "ADJUST HEIGHT" and the current value of the desk height.
 Move the toggle switch up or down to correct the displayed desk height. The set height starts flash-
ing and the blue lightbar fills up.
Please note: The desktop does not move during the process.
5.5 Changing the displayed unit – CM / INCH (
 Press the buttons 1 and
INCH and vice versa.
 The new selection starts flashing and the blue lightbar fills up.
5.6 Setting the standard height (
 Press the button sequence 1, 2, 1, 2. The display shows: "SELECT", "HEIGHT".
 Move up the toggle switch up or down to adjust the standard height.
 When the desired height is reached, wait for two seconds.
 The new standard height is stored as soon as the blue lightbar fills up.
6. Error codes
Error codes are always shown on the display with an "E" for error followed by a number. The most
common error codes are also provided with an extra function such as "E01" "INITIALISE". The display
alternates between a numeric code and a text message. The error code remains visible as long as you
keep the toggle switch pressed.
The main error codes:
The complete list of error codes is available in the comprehensive operating
instructions (steelcase.com)

7. Maintenance

Interval Inspection point Function check
Regularly Fastening
elements of the
height-adjustable
desk Flex
143621
at the same time for four seconds.
optional Active Touch control
at the same time for three seconds to change the unit from CM to
optional Active Touch control
E53-E64 COLLISION
E41-E52 OVERLOAD
E01 INITIALISATION
Required condition
Fastening All screws and other
fastening elements are
tightened / fixed
)
)
Action (if
necessary)
Retighten screws /
fix fastening
elements
F l e x
EN
Rév. A