Steelcase Flex Series Quick Manual page 12

It is necessary to carry out a manual reset before first use, see installation /
operating instructions (steelcase.com)
4.1 Height adjustment - Simple Touch control panel
 Move the toggle switch up or down to reach the desired desk height.
 The desktop moves up or down until you release the toggle switch, or the minimum / maximum
height has been reached.
The toggle switch must be operated continuously to move the desktop.
4.2 Height adjustment – Active Touch control panel (
 Move the toggle switch up or down to reach the desired desk height.
 The display shows the current desk height.
 The desktop moves up or down until you release the toggle switch, or the minimum / maximum
height has been reached.
For previously stored desk positions, the desktop movement stops briefly. Then
the movement continues.
4.2 AutoRun function – Active Touch control panel (
 Tap the control panel twice in the direction the desktop should move.
 The desktop moves up or down automatically to the stored desk position.
 To stop the automatic movement, tap the control panel.
With this panel, the desk reaches the stored height without having to touch the
controls permanently.
143621
optional
)
optional
)
F l e x
EN
Rév. A