Steelcase Flex Series Quick Manual page 13

(optional Active Touch control)
5. Settings
5.1 Storing desk positions
 Move the toggle switch up or down to reach the desired desk height.
 Press the button 1 or 2 for two seconds to store the position. If the lightbar fills up, the position
has been stored successfully.
 To store a new position, repeat the procedure.
 To clear all stored positions, press buttons 1 and 2 for one second. The display shows "PRESET
CLEAR" and the blue lightbar fills up.
5.2 Reminder function REM
 Press the REMinder button
Each time you press the button, the time interval changes by 15 minutes: OFF > 15m > 30m >
45m ... 90m > OFF
 At the desired time interval, wait until the blue lightbar fills up.
 When the selected time interval elapses, the desk moves briefly to remind you to change your posi-
tion.
EN
If you do not move the desktop within 5 minutes after the reminder, the
reminder function will turn off automatically.
5.3 Connecting the app to the table
 Download the Rise App from
tems).
 Turn on Bluetooth on your mobile phone.
 At the control panel, press the button
identification number of the desk appears on the display:
 Select the desk ID in the Rise App and connect. If successful, the control panel will display
"BLUETOOTH PAIRED".
 Press any button to leave the display of the control panel.
The Bluetooth symbol
the existing Bluetooth connection.
143621
repeatedly to set the desired reminder time.
Steelcase.com/rise
(compatible with iOS and Android operating sys-
and button 2 at the same time for two seconds. The
appears at the bottom right of the display and shows
F l e x
Rév. A