Steelcase Flex Series Quick Manual page 15

8. Cleaning
Clean the product regularly with a slightly moist cloth and a mild detergent. Tip: Lime-deficient water
reduces streaks and lime stripes.
Special instructions for linoleum surfaces
Use only neutral cleaners for linoleum surfaces.
Especially in the post-oxidation phase, linoleum becomes "yellowish", the drying room yellowing. Yellowing is
■
particularly noticeable in bright colours but disappears completely and the linoleum regains its original colour
when exposed to UV light. Yellowing occurs again when the surface is covered for a long time with, for example,
monitors, mousepads, etc. but disappears as described above as soon as the surface is exposed to the daylight
again.
Flowerpots and other pots made of terracotta or clay may leave stains on linoleum; please use suitable coasters.
■
Hand and device disinfectants may cause stains due to their high solvent content.
■
Colouring foods may leave stains that cannot be removed after a prolonged exposure time. Please clean
■
surfaces immediately after soiling.
Please do not place wet newspapers on the desk as the ink may dissolve due to moisture.
■
Linoleum only withstands heat up to 70 °C.
■
9. Disposal
Disassembly should be carried out by qualified personnel. If you want to disassemble and dispose of the
EN
height-adjustable desk Flex permanently, proceed as follows:
Disassemble the desk

Separate the resulting parts in: - reusable components - material groups to be disposed of (wood,

metal, plastic, electrical parts, etc.)
and return them to the recycling process. Follow all applicable regional regulations. Also follow the sepa-
rate instructions for disassembling / recycling.
10. Service and contact details
Manufacturer
Steelcase AG
Brienner Str. 42
80333 Munich
143621
Phone: +49 (0) 80 31 405 – 111
Email: DE lineone-de@steelcase.com
EN lineone-en@steelcase.com
FR lineone-fr@steelcase.com
ES posventaspain@steelcase.com
F l e x
Rév. A