Keysight N4376D Lightwave Component Analyzer, Getting Started
8
Function keys
9
Network analyzer
Port 3
10
Network analyzer
Port 2
Used to control the Lightwave
Component Analyzer.
Press the [Macro/Local] Utility
button on the network analyzer
to display the LCA function
keys.
•
: Setup an LCA
Measurement
•
: Perform a single
sweep measurement with the
current measurement setup
•
: Perform continuous
sweep measurements with the
current measurement setup
•
: Start the optical
power meter
•
: Start the LCA server
(if not already running)
This is an S parameter
measurement port of the
Network analyzer.
This is the RF port used for
electrical calibration and to
connect to differential EO, OE
and EE devices.
This is an S parameter
measurement port of the
Network analyzer.
This is the RF port used for
electrical calibration and to
connect to differential EO, OE
and EE devices.
Introduction
19