Table of Contents
Advertisement
Introduction
Initial safety information
10
The laser source used in the Lightwave Component Analyzer
is classified as Class 1M according to IEC 60825- 1/2007.
All laser sources comply with 21 CFR 1040.10 except for
deviations pursuant to Laser Notice No. 50, dated
2007- 06- 24.
Laser Safety
Laser class 1M label
Figure 1
Class 1M Safety Label
A sheet of laser safety labels is included. In order to meet
the requirements of IEC 60825- 1 we recommend that you
stick the laser safety labels, in your language, onto a suitable
location on the outside of the instrument where they are
clearly visible to anyone using the instrument
Laser wavelength range
Laser Type
Laser Class according to IEC 60825-1
Maximum CW output power of LCA
Maximum permissable CW output
power
Numerical aperture
Beam waist diameter
a CW output power is defined as the highest possible optical output
Keysight N4376D Lightwave Component Analyzer, Getting Started
power that the laser source can produce at the output connector
N4376D
850 ± 10 nm
DFB
1M
a
< 4 mW
5.3 mW
0.15
μ
< 50
m
Advertisement
Table of Contents
