4-Port Pna Version - Keysight N4376D Getting Started

4-port PNA version

Keysight N4376D Lightwave Component Analyzer, Getting Started
9
1
Figure 2 Front Panel for 4-port PNA (Options 42x)
For further information on the front panel of the network
analyzer, please refer to the documentation supplied with the
network analyzer.
1 Power switch
2
Port A
2 3 4
Turns on the optical test set.
To turn on the PNA, press the
PNA's power key.
Caution: Be sure you do not exceed
the RF power values and DC levels
noted on the front panel of the
instrument.
This is the RF port used for
electrical calibration and to
connect to single- ended or
differential E/O or E/E device.
Introduction
5
7
8
10
17