Table of Contents
Advertisement
4. Installing the Fast-Pack
4.1 Installation of heating
needle
Make sure one of the dents on heating
needle aligning the small triangle on
handpiece, push till to position.
Holding the grey shell to pull the heating
needle out from the handpiece.
The heating needle can be installed in
any one of 6 orientations. Pull it out
from handpiece then can be installed in
other orientations.
4
Installing the Fast-Pack
➢ To remove the heating needle, wait
➢ Even the heating needle cool down
4.2 Installation of adapter
Plug the head into the base if they are
separated in the package.
WARNING
for it to cool down, it takes about 2-3
seconds, and real-time temperature
will show on the screen.
already, we strongly recommend not
touch the metal part on heating
needle, there is a risk of heat injure or
damage the heating needle, hold the
grey shell to remove.
Page
8 / 25
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Fast-Pack and is the answer not in the manual?
Questions and answers