Konica Minolta AccurioPress C2070 Quick Manual page 95

6.1 Both Sides Adjustment
16
Press [X] or [Y] at each point, and enter the measured value using the keypad, [,], or [+] on the screen.
% If the printing position is misaligned to the minus (-) side, enter a positive value (+). If the printing
position is misaligned to the plus (+) side, enter a negative value (-).
% To reset a value, press [Clear].
% To switch the positive sign (+) and negative sign (-), press [+/-].
17
When entry processing is completed, press
[Adjustment Start].
18
After the adjustment is completed, press [OK].
% To finely adjust the adjustment value, con-
tinuously proceed to step 4 in "Zoom and
Image Shift Adjustment" (page 6-22).
% To register the adjustment value in a paper
profile, press [Register & OK].
% For details about how to register a paper
profile, refer to the [HTML User's Guide].
AccurioPress C2070series
6
6-21