Konica Minolta AccurioPress C2070 Quick Manual page 89

6.1 Both Sides Adjustment
11
Check a gap of the printing position refering the printed out chart.
% Repeat steps 7 to 10 until all gaps between the front and back sides are cleared.
12
Press [Exit Print Mode].
13
After the adjustment is completed, press [OK].
To finely adjust the adjustment value, continu-
ously proceed to step 4 in "Zoom and Image
Shift Adjustment" (page 6-22).
% To register adjustment values in a paper
profile, press [Register & OK].
% For details about how to register a paper
profile, refer to the [HTML User's Guide].
14
Press [Close] to exit the adjustment.
Gap Adjustment is then completed.
AccurioPress C2070series
6
6-15