Konica Minolta AccurioPress C2070 Quick Manual page 124

7.1 Replenish and Replace Consumables
3
Press the [Add Stapler] tab of the required saddle stitcher, then follow the on-screen instructions to re-
place a staple cartridge.
% The number on the right-hand side of the help message indicates a replacement procedure. To dis-
play the next step, press [,].
NOTICE
The Saddle Stitcher SD-506 contains two staple cartridges. Check the message, then be sure to pull
out the empty cartridge.
To remove a staple cartridge, securely hold its right and left sides, and pull it out toward you.
To install a staple cartridge, be careful not to mistake the top side for the bottom side. If the top side is
facing down, the staple cartridge cannot be inserted.
AccurioPress C2070series
7
7-6