Maximum Density Auto Adjustment (Ru) - Konica Minolta AccurioPress C2070 Quick Manual

6.2 Image Quality Adjustment
Order
STEP3
STEP4
Tips
Precautions regarding installing the Relay Unit RU-509:
To use [Each Paper Type Color Adj.] in [Color Density Control] while the Relay Unit RU-509 is installed, ex-
ecute [Each Paper Type Color Adj.] to configure tray settings before this procedure. For details, refer to the
[HTML User's Guide].
6.2.3

Maximum Density Auto Adjustment (RU)

Automatically adjust the maximum density of each of yellow, magenta, cyan, and black, using the output pa-
per density sensor that is installed on the optional Relay Unit RU-509. Carry out this function before carrying
out the [Color Density Control] function.
Tips
To enable this function, your service representative must specify the target maximum density value (target
density) in advance. For more information, contact your service representative.
-
Carry out Maximum Density Auto Adjustment (RU) using the paper that is used to register the target
maximum density value (target density).
- When [Maximum Density Auto Adjustment (RU)] is performed, image stabilization control is carried out
if you return to the normal screen. After image stabilization control is completed, you must carry out
calibration using the image controller. Then, carry out Color Density Manual Control (page 6-35).
1
Press [Adjustment] on the [MACHINE] screen.
AccurioPress C2070series
[Menu item]
Without Relay With Relay Unit
Unit RU-509 RU-509
Calibration [Maximum Density
(page 6-37) Auto Adjustment
(RU)] (page 6-29) or
[Maximum Density
Adjustment]
(Refer to the [HTML
User's Guide].)
- [Color Density Con-
trol] (page 6-35)
[Description]
Calibration:
Calibrates the color reproducibility that fluctu-
ates from day to day.
[Maximum Density Auto Adjustment (RU)] or
[Maximum Density Adjustment]:
Enhances the density reproducibility. Select
whether to make adjustments automatically or
manually.
[Color Density Control]:
Execute [Color Density Manual Control].
6
6-29