Konica Minolta AccurioPress C2070 Quick Manual page 90

6.1 Both Sides Adjustment
Chart Adjustment
You can print out a Both Sides Adjustment chart, measure measurement points using a scale, and enter
measurement values in order to carry out the adjustment.
Using this function, you can only enter measurement values to carry out the both-side adjustment. This is
convenient when an unclear misalignment is detected between the front and back sides to perform the du-
plex printing with a new type of paper or to change paper in a tray.
1
Press [Paper Setting] on the [MACHINE] screen.
2
Select the tray with the target paper loaded,
then press [Change Set].
3
Press [Both Sides Adj].
AccurioPress C2070series
6
6-16