Delay Start - Miele PWM 300 SmartBiz Operating And Installation Instructions

Delay start

With Delay start, you can delay the start
of a programme from 30 minutes up to
a maximum of 24 hours.
Selecting the Delay start func-
tion
Delay start cannot be selected in the
Drain/Spin programme.
 Select the programme required.
 Touch the  sensor control.
The  sensor control lights up brightly.
 Touch the  or  sensor control re-
peatedly until the required Delay start
time appears on the time display.
– In the case of settings below
10 hours, the Delay start time
changes in increments of 30 minutes.
– In the case of settings above
10 hours, the Delay start time
changes in increments of 1 hour.
Starting Delay start
 Touch the flashing Start/Stop sensor
control.
The Delay start process starts and
counts down on the time display.
The  symbol will flash.
28
Changing the Delay start time
 Touch the Start/Stop sensor control
until the door unlocks and the
 symbol goes out.
The Delay start process stops.
 Touch the  or  sensor control re-
peatedly until the required Delay start
time appears on the time display.
 Touch the flashing Start/Stop sensor
control.
Cancelling Delay start
 Touch the Start/Stop sensor control
until the door unlocks and the
 symbol goes out.
The Delay start process stops.
 Touch the brightly lit  sensor con-
trol.
The Delay start time is deleted. The pro-
gramme duration appears on the time
display.
 Touch the flashing Start/Stop sensor
control in order to start the wash pro-
gramme.