Table of Contents
Advertisement
Before using for the first time
Running the first programme
For safety reasons, spinning is not pos-
sible until the machine has been pre-
pared for use for the first time. To activ-
ate the spinning function, you must run
a wash programme without laundry and
without detergent.
Using detergent could result in an ex-
cessive build-up of foam!
Open the stopcock.
Turn the programme selector to the
Cottons position.
The washing machine is now switched
on and the temperature 60 °C lights up
in the control field.
Touch the Start/Stop sensor control.
The programme starts and the sym-
bol lights up in the control field.
After 10 minutes, the indicators dim
and the Start/Stop sensor control
starts flashing.
At the end of the programme, the Anti-
crease function is switched on. The
symbol lights up in the control field;
: appears on the time display.
Touch the Start/Stop sensor control.
The door will unlock.
18
Reach under the door grip and pull
the door open.
Tip: Leave the door slightly open to al-
low the drum to dry.
When the programme has ended,
turn the programme selector to .
The washing machine is switched off
and is now ready for use.
Hide quick links:
Advertisement
Table of Contents
