Temperature Reduction; Maximum Rinse Level; Suds Cooling - Miele PWM 300 SmartBiz Operating And Installation Instructions

 Temperature reduction
At high altitudes, water has a lower
boiling point. Miele recommends ac-
tivating the Temperature reduction set-
ting at altitudes of 2000 m or above to
prevent water from boiling.
Options
 = The Temperature reduction set-
ting is switched off (factory
default setting)
 = The Temperature reduction set-
ting is switched on
 Maximum rinse level
The water level in the rinses can be
permanently set to the highest value in
the Cottons and Minimum iron pro-
grammes.
This function is important for allergy
sufferers as it achieves excellent wash
results. The water consumption will be
increased.
Options
 = Maximum rinse level is
switched off (factory default
setting)
 = Maximum rinse level is
switched on
Programmable functions
 Suds cooling
Additional water flows into the drum at
the end of the main wash to cool the
suds down.
Suds cooling takes place when the Cot-
tons programme with a temperature of
70 °C or higher is selected.
Suds cooling should be activated:
– To prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin
– Where the drainage pipes do not
comply with DIN 1986
Options
 = Suds cooling is switched off
 = Suds cooling is switched on
(factory default setting)
67