Table of Contents
Advertisement
The programmable functions are used
to alter the machine's electronics to
suit changing requirements. Program-
mable functions can be altered at any
time.
Programming is carried out in 9 steps
(, , ... ) using the sensor con-
trols.
Opening the programming level
Prerequisites:
– The washing machine is switched on
and the programme selector is point-
ing to a wash programme.
– The washing machine door is open.
Touch the Start/Stop sensor control
and hold it down whilst carrying out
steps –.
Close the washing machine door.
Wait until the Start/Stop sensor con-
trol lights up constantly ...
... and then release the Start/
Stop sensor control.
After a few seconds, will light up on
the time display.
Programmable functions
Choosing and selecting a pro-
grammable function
The number of the programmable
function will appear on the time dis-
play as and a number, e.g. .
Touch the or sensor control to
scroll to the next or previous pro-
grammable function:
Programmable functions
End of programme tone
Sensor control tone
PIN code
Control field switch-off status
Memory
Additional pre-wash time
Temperature reduction
Maximum rinse level
Suds cooling
Anti-crease
Low water pressure
Backlight brightness dimmed
Welcome tone
Confirm the selected programmable
function by touching the Start/
Stop sensor control.
63
Hide quick links:
Advertisement
Table of Contents
