Subscribe to Our Youtube Channel
Related Manuals for Avalue Technology EMX-KBLUP
Summary of Contents for Avalue Technology EMX-KBLUP
- Page 1 EMX-KBLUP Intel® 7th Generation ULT Processor Thin Mini ITX Motherboard User’s Manual Ed –08 June 2017 Part No. E2047MKBU00R...
- Page 2 Disclaimer Avalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. Avalue Technology assumes no responsibility or liability for the...
-
Page 3: Technical Support
Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification. -
Page 4: Product Warranty
A product returned without proof of the purchase date is not eligible for warranty service. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer. 4 EMX-KBLUP User’s Manual... -
Page 5: Table Of Contents
Miscellaneous setting connector 1 (FPT1) ................30 2.3.21 Miscellaneous setting connector 2 (FPT2) ................30 2.3.22 LED indicator connector 1 (LED1) ..................... 31 2.3.23 LED indicator connector 2 (LED2) ..................... 31 2.3.24 Speaker connector (SPK1) ......................32 2.3.25 Mic-in connector (DMIC1) ......................32 EMX-KBLUP User’s Manual... - Page 6 3.6.2.9.1 Legacy Console Redirection Settings ................... 53 3.6.2.10 Intel TXT Information ......................53 3.6.2.11 Network Stack Configuration ....................54 3.6.2.12 CSM Configuration ........................ 54 3.6.2.13 NVMe Configuration ......................55 3.6.2.14 SDIO Configuration ....................... 55 3.6.2.15 USB Configuration ......................... 56 6 EMX-KBLUP User’s Manual...
- Page 7 Install VGA Driver ....................74 Install Serial IO Driver ..................... 75 Install ME Driver ...................... 76 Install Audio Driver (For Realtek ALC892 HD Audio) ..........77 Install LAN Driver ....................78 Install RST Driver ....................79 5. Mechanical Drawing ....................81 EMX-KBLUP User’s Manual...
-
Page 8: Getting Started
1.2 Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: 1 x EMX-KBLUP motherboard 1 x SATA cable 1 x SATA power cable ... -
Page 9: Document Amendment History
User’s Manual 1.3 Document Amendment History Revision Date Comment June 2017 Avalue Initial Release EMX-KBLUP User’s Manual... -
Page 10: Manual Objectives
We strongly recommend that you study this manual carefully before attempting to set up EMX-KBLUP or change the standard configurations. Whilst all the necessary information is available in this manual we would recommend that unless you are confident, you contact your supplier for guidance. -
Page 11: System Specifications
AC97 Codec Realtek ALC892 HD Audio Decoding Controller Audio Amp TI TPA3113D2PWP Stereo Class-D 6W x 2 Ethernet 1 x Intel® I219LM Gigabit Ethernet PHY LAN Chip 1 x Intel® I211AT PCI-e Gigabit Ethernet Ethernet Gigabit Ethernet EMX-KBLUP User’s Manual 11... - Page 12 1 x 2 x 20 pin, pitch 1.25mm connector for LVDS (must be using WF40H6-7GAA178 connector) 1 x 2 x 10 pin, pitch 1.25mm connector for eDP 1 x 1 x 5 pin, pitch 2.00mm Wafer connector for LCD inverter backlight connector (5V/12V) 12 EMX-KBLUP User’s Manual...
- Page 13 0 ~ 60°C (32~140°F) (with Air Flow) Storage Temp. -40 ~ +75°C Operating 0%~90% relative humidity, non-condensing Humidity Size (L x W) 6.7" x 6.7" (170mm x 170mm) Weight 0.40 kg Note: Specifications are subject to change without notice. EMX-KBLUP User’s Manual 13...
-
Page 14: Architecture Overview-Block Diagram
EMX-KBLUP User’s Manual 1.6 Architecture Overview—Block Diagram The following block diagram shows the architecture and main components of EMX-KBLUP. 14 EMX-KBLUP User’s Manual... -
Page 15: Hardware Configuration
User’s Manual 2. Hardware Configuration EMX-KBLUP User’s Manual 15... -
Page 16: Product Overview
EMX-KBLUP User’s Manual 2.1 Product Overview Note: If M.2 Type B 3042/2242/2260/2280 using PCI-e x2 device, it requires OEM BIOS ME setting; hence PCI-e slot is not workable. 16 EMX-KBLUP User’s Manual... - Page 17 User’s Manual Note: SD card support list please refer to HW Storage Compatibility Test report. EMX-KBLUP User’s Manual 17...
-
Page 18: Jumper And Connector List
5 x 2 header, pitch 2.54mm SODIMM1/2 206-pin DDR4 SO-DIMM socket FAUD1 Front Audio connector 5 x 2 header, pitch 2.54mm JBKL1 LCD Inverter connector 5 x 1 wafer, pitch 2.00mm JSPI1 SPI connector 4 x 2 header, pitch 2.00mm 18 EMX-KBLUP User’s Manual... - Page 19 I2C connector 5 x 1 header, pitch 2.00mm I2C1 HDMI1 HDMI connector LOUT1 Line-out audio jack MIC1 Mic-in audio jack DMIC1 Mic-in connector 5 x 1 header, pitch 2.54mm SD care slot SIM1 SIM card slot EMX-KBLUP User’s Manual 19...
-
Page 20: Setting Jumpers & Connectors
2.3 Setting Jumpers & Connectors 2.3.1 Serial port 1/2/3/4/5/6 pin9 signal select (JRI1/JRI2/JRI3/JRI4/JRI5/JRI6) Ring* JRI1 JRI2 JRI3 JRI4 +12V JRI5 JRI6 * Default 2.3.2 LVDS Back Light power selection (JSBKL1) PWM Mode* DC Mode * Default 20 EMX-KBLUP User’s Manual... -
Page 21: At/Atx Power Mode Select (Jsatx1)
User’s Manual 2.3.3 AT/ATX Power Mode Select (JSATX1) ATX* * Default 2.3.4 Clear CMOS (JCOMS1) Protect* Clear CMOS * Default EMX-KBLUP User’s Manual 21... -
Page 22: Lcd Inverter Connector (Jbkl1)
EMX-KBLUP User’s Manual 2.3.5 LCD Inverter connector (JBKL1) Signal Max current LVDS_BKLTCTL LVDS_BKLT_EN +12V 2.3.6 General purpose I/O connector (DIO1) Signal PIN PIN Signal SMB_CLK_S SMB_DATA_S 20 +5V(Max current = 0.5A) 22 EMX-KBLUP User’s Manual... -
Page 23: Serial Port 1/2 Connector (Com1/2)
PIN PIN Signal COM_DCD# COM_RXD COM_TXD COM_DTR# COM_DSR# COM_RTS# COM_CTS# COM_RI# (Max current = 0.5A) 2.3.8 Serial port 3/4/5/6 connector (COM3/4/5/6) Signal PIN PIN Signal COM_RI# (Max current = 0.5A) COM_CTS# COM_RTS# COM_DSR# COM_DTR# COM_TXD COM_RXD COM_DCD# EMX-KBLUP User’s Manual 23... -
Page 24: Serial Port 1/2 Rs485/422 Mode Connector (Jrs485_1/2)
EMX-KBLUP User’s Manual 2.3.9 Serial Port 1/2 RS485/422 Mode connector (JRS485_1/2) JRS485_1 JRS485_2 Signal PIN PIN Signal 485_422TX- 422RX- 485_422TX+ 422RX+ (Max current = 0.5A) 2.3.10 SATA Power connector 1/2 (SPWR1/2) SPWR1 SPWR2 Signal Max current +V5S_SATA +V12S_SATA 24 EMX-KBLUP User’s Manual... -
Page 25: Power Connector (Pwr1)
User’s Manual 2.3.11 Power connector (PWR1) Signal Signal +VIN +VIN 2.3.12 USB connector 3/4 (USB3/4) USB3 USB4 Signal Signal +V5A_USB78 +V5A_USB78 USB_DN7 USB_DN8 USB_DP7 USB_DP8 EMX-KBLUP User’s Manual 25... -
Page 26: Battery Connector (Bt1)
EMX-KBLUP User’s Manual 2.3.13 Battery connector (BT1) Signal 2.3.14 LPC connector (JLPC1) Signal PIN PIN Signal LPC_AD0 +3.3V LPC_AD1 PCH_PLTRST# LPC_AD2 LPC_FRAME# LPC_AD3 LPC_CLK LPC_SERIRQ 26 EMX-KBLUP User’s Manual... -
Page 27: Lvds Connector (Lvds1)
LVDS_DATA0_N 12 11 LVDS_DATA1_N LVDS_DATA2_P 16 15 LVDS_DATA3_P LVDS_DATA2_N 18 17 LVDS_DATA3_N LVDS_DATA4_P 22 21 LVDS_DATA5_P LVDS_DATA4_N 24 23 LVDS_DATA5_N LVDS_DATA6_P 28 27 LVDS_DATA7_P LVDS_DATA6_N 30 29 LVDS_DATA7_N LVDS_CLK1_P LVDS_CLK2_P LVDS_ CLK1_N LVDS_ CLK2_N +12V +12V EMX-KBLUP User’s Manual 27... -
Page 28: Audio Connector (Faud1)
EMX-KBLUP User’s Manual 2.3.16 Audio connector (FAUD1) Signal PIN PIN Signal LINE2_JD LINE2_LIN SENSE_B MIC2_JD LINE2_RIN AUD_FRONT_DET MIC2_RIN MIC2_LIN 2.3.17 EC Debug (JEC_SPI) Signal PIN PIN Signal +3VSPI_EC EC_FSCE# EC_FSCK EC_FMISO EC_FMOSI EC_HOLD# EC_SMCLK EC_SMDAT 28 EMX-KBLUP User’s Manual... -
Page 29: Spi Connector (Jspi1)
User’s Manual 2.3.18 SPI connector (JSPI1) Signal PIN PIN Signal HOLD# SPI_SI SPI_SO SPI_CLK SPI0_CS0# +3.3A_SPI 2.3.19 Sony/Philips Digital Interface (SPDIF1) Signal SPDIF_OUT EMX-KBLUP User’s Manual 29... -
Page 30: Miscellaneous Setting Connector 1 (Fpt1)
1. Pin2 with GND: Control LVDS Backlight by use Variable Resistor. 2. BLK_UP with GND/BLK_DN with GND: Step control LVDS Backlight by use button and BIOS must to be set “BR Button”. (Please refer to page.61) 30 EMX-KBLUP User’s Manual... -
Page 31: Led Indicator Connector 1 (Led1)
User’s Manual 2.3.22 LED indicator connector 1 (LED1) Signal LAN1_1000#_LED LAN1_100#_LED LAN1_ACT_N LAN1_ACT_P 2.3.23 LED indicator connector 2 (LED2) Signal LAN2_1000#_LED LAN2_100#_LED LAN2_ACT_N LAN2_ACT_P EMX-KBLUP User’s Manual 31... -
Page 32: Speaker Connector (Spk1)
EMX-KBLUP User’s Manual 2.3.24 Speaker connector (SPK1) Signal SPK_R- SPK_R+ SPK_L- SPK_L+ 2.3.25 Mic-in connector (DMIC1) Signal DMIC_CLK DMIC_DATA +3.3V 32 EMX-KBLUP User’s Manual... -
Page 33: I2C Connector (I2C1)
I2C0_DATA 2.3.27 eDP_Panel connector (EDP1) Signal PIN PIN Signal EDP_PanelTXN0 EDP_PanelTXN3 EDP_PanelTXP0 EDP_PanelTXP3 EDP_PanelTXN1 EDP_PanelTXP1 11 12 EDP_PanelAUXN 14 EDP_PanelAUXP EDP_PanelTXN2 15 Note: EDP_PanelTXP2 17 18 EDP_Panel_HPD Default 3.3V. +V3512_EDP +V3512_EDP This a BOM optional part. EMX-KBLUP User’s Manual 33... -
Page 34: Bios Setup
EMX-KBLUP User’s Manual 3.BIOS Setup 34 EMX-KBLUP User’s Manual... -
Page 35: Introduction
If you do not press the keys at the correct time and the system does not boot, an error message will be displayed and you will again be asked to. Press F1 to Continue, DEL to enter SETUP EMX-KBLUP User’s Manual 35... -
Page 36: Using Setup
Note: Some of the navigation keys differ from one screen to another. To Display a Sub Menu Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “” pointer marks all sub menus. 36 EMX-KBLUP User’s Manual... -
Page 37: Getting Help
BIOS Vendor and your systems manufacturer to provide the absolute maximum performance and reliability. Even a seemingly small change to the chipset setup has the potential for causing you to use the override. EMX-KBLUP User’s Manual 37... -
Page 38: Bios Setup
<Enter> to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. 38 EMX-KBLUP User’s Manual... -
Page 39: System Language
Visit the Avalue website (www.avalue.com.tw) to download the latest product and BIOS information. 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. EMX-KBLUP User’s Manual 39... -
Page 40: Cpu Configuration
Number of cores to enable in each processor Active Processor Cores package. Enabled for Windows XP and Linux (OS Disabled optimized for Hyper-Threading Technology) Hyper-Threading Enabled[Default], and Disabled for other OS (OS not optimized for Hyper-Threading Technology. 40 EMX-KBLUP User’s Manual... -
Page 41: Power & Performance
Allows more than two frequency ranges to be Intel® SpeedStep™ Enabled[Default] supported. Enable/Disable processor Turbo Mode (requires Disabled, Turbo Mode EMTTM enabled too). AUTO means enabled, unless Enabled[Default] max turbo ratio is bigger than 16 – SKL A0 W/A. EMX-KBLUP User’s Manual 41... - Page 42 Enable/Disable Energy Efficient Turbo Feature. This feature will opportunistically lower the turbo Disabled frequency to increase efficiency. Recommended Energy Efficient Turbo Enabled[Default] only to disable in overclocking situations where turbo frequency must remain constant. Otherwise, leave enabled. 42 EMX-KBLUP User’s Manual...
-
Page 43: Gt-Power Management Control
User’s Manual 3.6.2.2.2 GT-Power Management Control Item Options Description Disabled, Check to enable render standby RC6(Render Standby) Enabled[Default] support. Default Max Frequency[Default]/ 100Mhz/150Mhz/200Mhz/250Mhz/300Mh z/350Mhz/400Mhz/450Mhz/500Mhz/550M Maximum GT frequency Auto Updated. hz/600Mhz/650Mhz/700Mhz/750Mhz/800 Mhz/850Mhz/900Mhz/950Mhz/1000Mhz/1 050Mhz/1100Mhz/1150Mhz/1200Mhz EMX-KBLUP User’s Manual 43... -
Page 44: Pch-Fw Configuration
EMX-KBLUP User’s Manual 3.6.2.3 PCH-FW Configuration Item Options Description Disabled, When Disabled ME will not be unconfigured ME Unconfig on RTC Clear Enabled[Default] on RTC Clear. 3.6.2.3.1 Firmware Update Configuration 44 EMX-KBLUP User’s Manual... -
Page 45: Ptt Configuration
Select TPM device: PTT or dTPM. PTT-Enables PTT in SkuMgr dTPM 1.2 – Disables PTT in dTPM TPM Device Selection PTT[Default], SkuMgr Warning! PTT/dTPM will be disabled and all data saved on it will be lost. EMX-KBLUP User’s Manual 45... -
Page 46: Trusted Computing
3.6.2.4 Trusted Computing Item Options Description Enables or Disables BIOS support for security Disable Security Device Support devices. O.S. will not show Security Device. TCG EFI Enable[Default] protocol and INT1A interface will not be available. 3.6.2.5 APCI Settings 46 EMX-KBLUP User’s Manual... -
Page 47: It8528 Super Io Configuration
USB Standby Power Setting Enabled[Default] during S3/S4/S5. 3.6.2.6 IT8528 Super IO Configuration You can use this item to set up or change the IT8528 Super IO configuration for serial ports. Please refer to 3.6.2.6.1~ 3.6.2.6.6 for more information. EMX-KBLUP User’s Manual 47... -
Page 48: Serial Port 1 Configuration
Set Parameters of Serial Port 6 (COMF). 3.6.2.6.1 Serial Port 1 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled UART 232[Default], UART 232 422 485 UART 422, Change the Serial Port as RS232/422/485. UART 485 48 EMX-KBLUP User’s Manual... -
Page 49: Serial Port 2 Configuration
3.6.2.6.2 Serial Port 2 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled UART 232[Default], UART 232 422 485 UART 422, Change the Serial Port as RS232/422/485. UART 485 3.6.2.6.3 Serial Port 3 Configuration EMX-KBLUP User’s Manual 49... -
Page 50: Serial Port 4 Configuration
Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.6.4 Serial Port 4 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.6.5 Serial Port 5 Configuration 50 EMX-KBLUP User’s Manual... -
Page 51: Serial Port 6 Configuration
User’s Manual Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.6.6 Serial Port 6 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.7 H/W Monitor EMX-KBLUP User’s Manual 51... -
Page 52: S5 Rtc Wake Settings
Enable or disable System wake on alarm event. Disabled[Default], Select FixedTime, system will wake on the Wake system from S5 Fixed Time hr::min::sec specified. Select DynamicTime, Dynamic Time System will wake on the current time + Increase minutes(s). 3.6.2.9 Serial Port Console Redirection 52 EMX-KBLUP User’s Manual... -
Page 53: Legacy Console Redirection Settings
Console Redirection Enable or Disable. Enabled 3.6.2.9.1 Legacy Console Redirection Settings Item Option Description Select a COM port to display redirection of Legacy Serial Redirection Port COM1[Default] Legacy OS and Legacy OPROM Messages. 3.6.2.10 Intel TXT Information EMX-KBLUP User’s Manual 53... -
Page 54: Network Stack Configuration
EMX-KBLUP User’s Manual 3.6.2.11 Network Stack Configuration Item Options Description Enabled Enable/Disable UEFI Network Stack. Network Stack Disabled[Default] 3.6.2.12 CSM Configuration Item Options Description Enabled CSM Support Enable/Disable CSM Support. Disabled[Default], 54 EMX-KBLUP User’s Manual... -
Page 55: Nvme Configuration
Auto Option: Access SD device in DMA mode if ADMA controller supports it, otherwise in PIO mode. DMA SDIO Access Mode SDMA Option: Access SD device in DMA mode. PIO Option: Access SD device in PIO mode. EMX-KBLUP User’s Manual 55... -
Page 56: Usb Configuration
Auto[Default] Device power-up delay Manual uses default value: for a Root port it is 100ms, for a Hub port the delay is taken form Hub descriptor. Mass storage device emulation type. ‘AUTO’ Mass Storage Devices Auto[Default] 56 EMX-KBLUP User’s Manual... -
Page 57: Chipset
Optical drives are emulated as ‘CDROM’, Forced FDD Hard Disk drives with no media will be emulated according CD-ROM to a drive type. 3.6.3 Chipset 3.6.3.1 System Agent (SA) Configuration EMX-KBLUP User’s Manual 57... -
Page 58: Graphics Configuration
1024x768 24/1[Default] 800x600 18/1 1024x768 18/1 1366x768 18/1 1024x600 18/1 1280x800 18/1 Port1-EDP to LVDS (Chrotel 7511) CH7511 EDID Panel Option 1920x1200 24/2 Panel EDID Option. 1920x1080 18/2 1280x1024 24/2 1440x900 18/2 1600x1200 24/2 1366x768 24/1 58 EMX-KBLUP User’s Manual... -
Page 59: Pch-Io Configuration
LVDS Back Light PWM Select LVDS back light PWM Frequency Frequency. 3.6.3.2 PCH-IO Configuration Item Option Description Disabled PCH LAN(i219) Controller Enable/Disable onboard NIC. Enabled[Default] Disabled Enable/Disable integrated LAN to wake Wake on LAN Enable Enabled[Default] the system. EMX-KBLUP User’s Manual 59... -
Page 60: Pci Express Configuration
EMX-KBLUP User’s Manual Quiet Serial IRQ Mode Configure Serial IRQ Mode. Continuous[Default] LPC Bus[Default] Port 80h Redirection Control where the Port 80h cycle are sent. PCIE Bus 3.6.3.2.1 PCI Express Configuration 3.6.3.2.1.1 PCI Express Root Port 5 (i210/211) 60 EMX-KBLUP User’s Manual... - Page 61 3.6.3.2.1.2 PCI Express Root Port 6 (PCIe Slot) Item Option Description Enabled[Default], PCI Express Root Port 6 Control the PCI Express Root Port. Disabled Unknown Identify the SATA Technology if it is Default Technology x1[Default] or ISATA or Flex or DirectConnect or M2. EMX-KBLUP User’s Manual 61...
- Page 62 ISATA or Flex or DirectConnect or M2. Sata Express Disabled[Default] Set the ASPM Level: Force L0s – Force all links to L0s State AUTO – BIOS auto ASPM Support configure DISABLE – Disables ASPM. L0sL1 Auto, 62 EMX-KBLUP User’s Manual...
- Page 63 L0s State AUTO – BIOS auto ASPM Support configure DISABLE – Disables ASPM. L0sL1 Auto, Disabled[Default] L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2, Auto[Default] Gen1 PCIe Speed Configure PCIe speed. Gen2 Gen3 EMX-KBLUP User’s Manual 63...
- Page 64 L0s State AUTO – BIOS auto ASPM Support configure DISABLE – Disables ASPM. L0sL1 Auto, Disabled[Default] L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2, Auto[Default] Gen1 PCIe Speed Configure PCIe speed. Gen2 Gen3 64 EMX-KBLUP User’s Manual...
-
Page 65: Sata And Rst Configuration
Identify the SATA port is connected to Solid SATA Device Type Solid State Drive State Drive or Hard Disk Drive. Unknown ISATA[Default] Identify the SATA Topology if it is Default or Topology Direct Connect ISATA or Flex or DirectConnect or M2. Flex EMX-KBLUP User’s Manual 65... -
Page 66: Usb Configuration
ISATA or Flex or DirectConnect or M2. Flex 3.6.3.2.3 USB Configuration Item Option Description Option to disable Compliance Mode. Default FALSE[Default], XHCI Disable Compliance Mode is FALSE to not disable Compliance Mode. TRUE Set TRUE to disable Compliance Mode. 66 EMX-KBLUP User’s Manual... -
Page 67: Hd Audio Configuration
Enabled = HDA will be HD Audio Enabled unconditionally enabled Auto = HDA will be enabled if Auto[Default], present, disabled otherwise. 20db[Default] 26db Amplifier Gain Amplifier Gain. 32db 36db 3.6.3.2.5 SCS Configuration EMX-KBLUP User’s Manual 67... -
Page 68: Security
GPIO conflict. GPP_D10 as GpioInt/GpioIo Warning: 1. Requires RVP rework. Sideband card detect is not supported on Win 7. 3.6.4 Security Administrator Password Set setup Administrator Password User Password Set User Password 68 EMX-KBLUP User’s Manual... -
Page 69: Secure Boot Menu
Attempt Secure Boot enrolled, System mode is User/Deployed, and Enabled CSM function is disabled. Secure Boot mode selector. Standard/Custom. In Standard Secure Boot Mode Custom mode Secure Boot Variables can be Custom[Default] configured without authentication. 3.6.4.1.1 Key Management EMX-KBLUP User’s Manual 69... -
Page 70: Boot
Enables or disables boot with initialization of a Disabled[Default] Fast Boot minimal set of devices required to launch active Enabled boot option. Has no effect for BBS boot options. Boot Option #1 Set the system boot order. 70 EMX-KBLUP User’s Manual... -
Page 71: Save And Exit
Reset system setup without saving any changes. 3.6.6.3 Restore Defaults Restore/Load Default values for all the setup options. 3.6.6.4 Launch EFI Shell from filesystem device Attempts to Launch EFI Shell application (Shell.efi) from one of the available filesystem devices. EMX-KBLUP User’s Manual 71... -
Page 72: Drivers Installation
EMX-KBLUP User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen. 72 EMX-KBLUP User’s Manual... -
Page 73: Install Chipset Driver
Windows 10 operation system. If the warning message appears while the installation process, click Continue to go on. Step 3. Click Install. Step 4. Complete setup. Step1. Click Next. Step 2. Click Accept. EMX-KBLUP User’s Manual 73... -
Page 74: Install Vga Driver
Windows 10 operation system. Step 3. Click Next. Step 1. Click Next to continue installation. Step 4. Click Next. Step 2. Step 5. Click Finish to complete setup. Click Yes to accept license agreement. 74 EMX-KBLUP User’s Manual... -
Page 75: Install Serial Io Driver
Windows 10 operation system. Step 3. Click Next. Step 1. Click Next to continue installation. Step 4. Click Next. Step 2. Click Next. Step 5. Click Finish to complete setup. EMX-KBLUP User’s Manual 75... -
Page 76: Install Me Driver
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Next. Step 4. Click Finish to complete setup. Step 1. Click Next to continue setup. Step 2. Click Next. 76 EMX-KBLUP User’s Manual... -
Page 77: Install Audio Driver (For Realtek Alc892 Hd Audio)
Windows 10 operation system. If the warning message appears while the installation process, click Continue to go on. Step1. Click Next to Install. Step 2. Click Finish to complete setup. EMX-KBLUP User’s Manual 77... -
Page 78: Install Lan Driver
Windows 10 operation system. Step 3. Click Next. Step 1. Click Next to continue installation. Step 4. Click Install. Step 5. Click Finish to complete setup. Step 2. Click Next. 78 EMX-KBLUP User’s Manual... -
Page 79: Install Rst Driver
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Next. Step 1. Click Next to continue installation. Step 4. Click Next. Step 2. Click Next. Step 5. Click Next. EMX-KBLUP User’s Manual 79... - Page 80 EMX-KBLUP User’s Manual Step 6. Click Next. Step 7. Click Finish to complete setup. 80 EMX-KBLUP User’s Manual...
-
Page 81: Mechanical Drawing
User’s Manual 5. Mechanical Drawing EMX-KBLUP User’s Manual 81... - Page 82 EMX-KBLUP User’s Manual Unit: mm 82 EMX-KBLUP User’s Manual...
- Page 83 User’s Manual Unit: mm EMX-KBLUP User’s Manual 83...
Need help?
Do you have a question about the EMX-KBLUP and is the answer not in the manual?
Questions and answers