Sata And Rst Configuration - Avalue Technology EMX-KBLUP User Manual

3.6.3.2.2 SATA And RST Configuration

Item
SATA Controller(s)
SATA Mode Selection
SATA Test Mode
SATA Controller Speed
Port 1
SATA Device Type
Topology
Port 2
SATA Device Type
Topology
Option
Enabled[Default],
Disabled
AHCI[Default],
Enabled,
Disabled[Default]
Default[Default],
Gen1
Gen2
Gen3
Enabled[Default],
Disabled
Hard Disk Drive
Solid State Drive[Default]
Unknown
ISATA
Direct Connect
Flex
M2[Default]
Enabled[Default],
Disabled
Hard Disk Drive[Default]
Solid State Drive
Unknown
ISATA[Default]
Direct Connect
Flex
Description
Enable/Disable SATA Device.
Determines how SATA controller(s) operate.
Test Mode Enable/Disable (Loop Back).
Indicates the maximum speed the SATA
controller can support.
Enable or Disable SATA Port.
Identify the SATA port is connected to Solid
State Drive or Hard Disk Drive.
Identify the SATA Topology if it is Default or
ISATA or Flex or DirectConnect or M2.
Enable or Disable SATA Port.
Identify the SATA port is connected to Solid
State Drive or Hard Disk Drive.
Identify the SATA Topology if it is Default or
ISATA or Flex or DirectConnect or M2.
EMX-KBLUP User's Manual 65
User's Manual