Roborock S5 Series Manual page 10

Installation
Add Device
2
Go to the "My Device" page of the Mi Home app and tap "+"
on the top right corner. Find newly added devices in the
"My Device" list
Reset WIFI
3
To Reset the WIFI to default, open the upper cover to check
the WIFI indicator status next to the reset button. Press and
hold the key and key until you hear "Reset WIFI ".
Resetting is completed when the WIFI indicator flashes
slowly. The product will enter a pending connection state.
5 Install the mopping module
Install the mop cloth: Wet the
1
mopping cloth and wring it until it
doesn't drip.
Slot it firmly into the water tank
WIFI indicator light
Slow blinking: Waiting to connect
Fast blinking: Connecting
Stable: WIFI connected
Scan to download the APP
Fill the water tank: Open the stopper, fill the tank with
2
water, and close the stopper
Install the module: Attach the module to the bottom of the main
3
unit following the alignment markers on the mopping module.
You will hear a click when it is installed properly
.
Note: For optimum mopping, first vacuum the mopping area three times.
8