Related Manuals for Roborock S8 MaxV Ultra
Summary of Contents for Roborock S8 MaxV Ultra
- Page 1 Roborock S8 MaxV Ultra Robotic Vacuum Cleaner User Manual Read this user manual with diagrams carefully before using this product and store it properly for future reference.
- Page 2 English Français Deutsch Italiano Español Nederlands Polski Norsk Svenska...
-
Page 3: Table Of Contents
Contents 05 Safety Information 06 International Symbols Explanation 07 Product Overview 08 Installation 09 Connecting to the App 09 Instructions for Use 11 Routine Maintenance 14 Basic Parameters 15 Common Issues... -
Page 4: Safety Information
• Do not sit or stand on the robot or dock. • To prevent corrosion or damage, do not use any disinfectant and only use cleaning solution recommended by Roborock in the solution cartridge. • Do not put any low objects (such as shoes, mats) near raised areas like stairs. Otherwise, the robot may fall down caused by malfunctional sensors. -
Page 5: International Symbols Explanation
• Do not place any object, child, or pet on the product or dock, or cover it with any item (including dust-proof cover) whether it is in operation or not. • Do not pick up anything burning or smoking, such as cigarettes, matches, or hot ashes. •... -
Page 6: Product Overview
Product Overview A1-5—Wall Sensor VibraRise Module A1-6—Reactive AI Obstacle Recognition A4-1—Mop Cloth Attachment Slot Sensor Robot (Top View) A4-2—Vibration Module A1-7—Dock Locator —Mop Only/Child Lock A4-3—Edgewise Mopping Module A1-8—LED Fill Light • Press to start Mop Only Note: The mop cloth mounts are non-detachable. •... -
Page 7: Installation
A11-5—Drying Air Outlets in the middle until you hear a click. Installation A11-6—Cleaning Tank of Edgewise B2-3— Connect the power cord to the back Mopping Module of the dock, and keep the excess Important Information A11-7—Dock Base cord inside the storage slot. B1-1—... -
Page 8: Connecting To The App
C2-2— Open the lid of the cartridge and Open the Roborock app, tap the "Scan to B3-1— Dock status indicator light dim, robot add cleaning solution. Connect" or "Search for Device" button and power indicator light breathing: add your device following the in-app guide. - Page 9 Spot Cleaning Press and hold to turn off the robot and • The robot will automatically shut down if left sleep for more than 12 hours. complete the cleaning cycle. Press simultaneously to start spot Note: The robot cannot be turned off when it is being Washing the Mop Cloths cleaning.
-
Page 10: Routine Maintenance
Drying period, or set whether to enable auto top- Restoring Factory Settings up, emptying and drying, to dim the button Drying starts automatically after mop If the robot does not function properly after light, or lower the volume of the voice washing or after cleaning is completed. - Page 11 D1-9— Reinstall the main brushes. Firmly snap Main Wheels Edgewise Mop Cloth the main brush bearings into place. * Clean as required. * Clean as required and replace every 3-6 months. Only after the bearings are securely D7-1— Unscrew the screw in the middle of Clean the main wheels with a soft, dry cloth.
- Page 12 Charging Contacts Water Filter Note: Make sure the disposable dust bag is properly installed to avoid waste escaping and damaging the dock. * Clean as required. * Clean as required. D16-4— Install the dust container cover Use a soft, dry cloth to wipe the charging Pull out the filter.
-
Page 13: Basic Parameters
Basic Parameters Robot Model S82USV 14.4V/5200mAh (TYP) Battery lithium-ion battery Rated Input 20VDC 1.5A Charging Time Approx. 4 hours Note: The serial number is on a sticker on the underside of the robot. Empty Wash Fill Dock Model EWFD13HRR Rated Input Voltage 220-240VAC Rated Frequency 50-60Hz Rated Input... -
Page 14: Common Issues
The edgewise • Unable to connect to WiFi abruptly. There may be an mopping module • Check whether the edgewise mopping module is error with your router settings. Contact Roborock is unable to jammed. Customer Service for help with troubleshooting. - Page 15 Common Issues Issue Solution Issue Solution The robot begins • The mop cloths are not attached properly. Reinstall • The wall sensor, cliff sensors, or carpet sensor may be Reduced to miss certain them. dirty. Clean them with a soft, dry cloth. mop washing spots •...
Need help?
Do you have a question about the S8 MaxV Ultra and is the answer not in the manual?
Questions and answers