Elecro Engineering Titan Optima Series Installation & Operating Manual page 14

MODBUS Setup
Refer to your BMS Management System manual for the required settings. SET BAUD touch the 'O.K'
button key to select, 'MODBUS SET BAUD' will be displayed, touch the 'O.K' button key to select and
'SET BAUD 19200 Baud' will be displayed, touch the 'UP' / 'DOWN' button keys for the other option 'SET
BAUD 9600 Baud' touch the 'O.K' button key to select the required, Baud rate.
Set Address
Touch the 'UP' button and 'MODBUS SET ADDRESS' will be displayed, touch the 'UP' / 'DOWN' button
keys to set the required address, touch the 'O.K' button key, the display will revert back to show 'MODBUS
SET ADDRESS'.
14