Printable Area - Epson DLQ-3500II User Manual

You cannot preprint in the area with the diagonal shading in the illustrations below, and can preprint
only with colors whose reflectivity is under 60% (for instance black). Avoid punching holes in the
restricted area below because punctures are also recognized as colors whose reflectivity is under 60%.
Before printing on pre printed sheets, verify that the area your document will print on does not overlap
with the pre printed area by printing separate sample sheets and comparing their printed areas.
Area measurements
A: 5 mm (0.20 inch)
B: 12 mm (0.47 inch)

Printable area

Single sheets (including single sheet multipart forms)
DLQ-3500II/DLQ-3500IIN
A: 0 mm (0 inch) or more
B: The minimum left and right margins
are 3.0 mm (0.12 inch) each.
The maximum printable width is 345.44 mm
(13.6 inches). For single sheets wider than
351.44 mm (13.8 inches), the side margins
increase proportionally to match the width of
the paper.
User's Guide
Product Information 134