Automatic Sheet Alignment Unit; Installing The Automatic Sheet Alignment Unit - Epson DLQ-3500II User Manual

3. Press the Load/Eject button. The printer feeds the paper backward to the standby position. The
paper is still attached to the tractor but is no longer in the paper path.
4. Select Manual/CSF as the paper source on the home screen by pressing the Paper Source button.
Note:
To load another type of continuous paper, you need to remove the cut sheet feeder.

Automatic Sheet Alignment Unit

You can load single sheet paper more easily by using the optional automatic sheet alignment unit
C935741. It automatically positions the paper straight and feeds into the printer.
You can use single sheet paper, single sheet multipart forms, envelopes, and postcards with the
automatic sheet alignment unit. See "Paper" on page 126 for information on the paper specifications.
Note:
❏ A warning message is displayed on the LCD screen if you try to feed continuous paper while the
automatic sheet alignment unit is installed. Remove the automatic alignment unit. Also, you cannot
install the automatic sheet alignment unit and optional cut sheet feeder at the same time.
❏ This option may not be available in some countries.

Installing the automatic sheet alignment unit

Follow these steps to install the automatic sheet alignment unit.
1. Turn off the printer.
Warning:
!
If you have just used the printer, the print head may be hot. Be careful not to touch it until it
cools down.
2. Remove the sheet guide.
3. Hold the automatic sheet alignment unit horizontally with both hands, and slide the slots on both
sides of it onto the mounting pegs in the printer as shown below. Then lower the unit until it locks
into place.
DLQ-3500II/DLQ-3500IIN
Options and Consumables
User's Guide
118