Epson DLQ-3500II User Manual page 28

Head Gap
Adjust the head gap according to the type of paper you are using. Usually, this should be left at the
default setting, Auto. See "Adjusting the Head Gap" on page 35.
Paper Type
Select the type of paper on which you want to print.
Manual Feed Wait Time
The length of wait time between the time paper is inserted into the sheet guide and when it is fed. If the
paper feeds before its position has been adjusted correctly, you can increase the wait time.
Buzzer
The printer beeps when an error occurs. (See "Checking Messages on the LCD Screen" on page 86
for more information on printer errors.) If you do not want the printer to beep when an error occurs,
turn this setting off.
Display QR Code
Set to On to display QR codes on the LCD display that allow you to access further information on the
Internet.
Low-Noise Mode
Set to On to reduce the printing speed and thereby lower the noise produced during printing.
Sleep Timer
Adjust the time period to enter a sleep mode (energy saving mode) when the printer has not
performed any operations. The LCD screen turns black when the setting time passes.
DLQ-3500II/DLQ-3500IIN
Menu Options for Settings
User's Guide
28