Epson DLQ-3500II User Manual page 64

Settings
*
Print Optimizations
Head Gap
Print Speed
Print Direction
Printable Area
Top Margin Priority
Printer Font Setting
Packet mode
* For details, see Windows help.
Explanations
Select Disable when the printer does not use the device fonts and select Enable when
the printer uses the device fonts.
Make sure you select the appropriate setting according to the thickness of the paper
you are using or the total thickness of the multipart form.
Printer Setting Uses the settings stored in the printer.
Auto The printer automatically measures the thickness of the paper
and selects the appropriate settings.
9, 8, 7, 6, 5, 4, 3, 2, 1, Select the appropriate setting according to the thickness of the
0, -1 paper you are using. When printing on continuous paper, the
printer automatically selects Auto.
This setting allows you to select print speed. Select Printer Setting when you want to
print using the settings stored in the printer. When Standard is selected, prints in
standard printing mode. When High Speed is selected, prints in high speed printing
mode.
This setting allows you to select bidirectional printing. Selecting the Printer Setting
will use the setting stored in the printer. Selecting Bidirectional will print in bidirec-
tional printing mode. Selecting Unidirectional will print in unidirectional printing
mode.
Make sure that Bi-d is selected as the Print direction setting stored in the printer.
Otherwise this setting is ignored by the printer.
If Standard is selected, the normal printable area for Epson impact printers is used. If
Maximum is selected, the printer's maximum printable area is used.
Select which setting for the print start position is to be used; driver setting or printer
setting. For more details, see Help for the printer driver.
Select a character table group to use. You can select one of three character table
groups, Standard, Expanded, and None (Bit Image printing).
When Standard or Expanded is selected, the printer uses the device fonts. Expanded
includes more fonts than Standard.
When None is selected, the printer uses bit map images instead of the device fonts.
For details on the fonts which are included in each table, see "Electronic" on
page 124.
Ordinarily, there is no need to change this setting. If you change the printer's Packet
mode settings, change this setting to match. If the printer and printer driver settings
are different, you may not be able to print correctly. For more details, see Help for the
printer driver.
DLQ-3500II/DLQ-3500IIN
Printer Software
User's Guide
64