Installation - Yetter 2968-050 Set-Up / Parts Manual

Step 1: Remove the items listed below that are part of the closing wheel assembly on the seeding unit. The closing
discs will remain in the same location directly behind the gauge wheels. On 1200 row units, mark the set of holes
on each side of the row unit that the disc scrapers (Item 2 in photo below) were mounted to.
10
INSTALLATION INSTRUCTIONS
1200 SERIES ROW UNIT
1 – SPRING PIN & CLIP
2 – HARDWARE FOR THE DISC SCRAPER
3 – HARDWARE THAT ATTACHES THE SPRING HOLDER
4 – HARDWARE FOR THE PRESS WHEEL BRACKET
5 – HARDWARE FOR THE PRESS WHEEL
OPTIONAL – EACH GAUGE WHEEL
2100 SERIES ROW UNIT
1 – HARDWARE FOR THE PRESS WHEEL BRACKET
2 – HARDWARE THAT ATTACHES THE PRESS WHEEL SPRING HOLDER