Installing Cpu Heat Sink And Hdd, Fdd Brackets - Advantech MIC-3365 Manual

1.10 Installing CPU heat sink and HDD, FDD
brackets
® ®
The MIC-3365 accepts Intel socket 370 Pentium III Cuppermine
® TM
CPU or Intel socket 370 Celeron CPU. In order to meet critical
environmental conditions and the physical space of the MIC-3365 at
the same time, Advantech designed a heat sink to fulfill both needs.
Please refer to Figure 1-7 for an illustration of the heat sink used for
the MIC-3365 and MIC-3365D, 1-slot wide solution. Figure 1-8
illustrates the installation method of the heat sink, HDD, and FDD
brackets used for the MIC-3365F.
® TM
Because the thickness of the Pentium III and Celeron CPU are
different, Advantech provides a samll aluminum plate along with the
®
heat sink when installed with a Pentium III CPU. The small alumi-
num plate is default fastened on the heat sink in the factory. If users
TM
would like to use a Celeron CPU on the MIC-3365, please remove
the small aluminum plate from the heat sink.
Figure 1-6: Heat sink installation for 1U solution
Chapter 1 Hardware Configuration 1 5