Clear Cmos (Jp5) - Advantech MIC-3365 Manual

1.5.3 Clear CMOS (JP5)

This jumper is used to erase CMOS data and reset system BIOS
information. Follow the procedures below to clear the CMOS.
1. Turn off the system.
2. Close jumper JP5 (2-3).
3. Turn on the system. The CMOS is now cleared.
4. Turn off the system. Close jumper JP5 (1-2).
5. Turn on the system. The BIOS is reset to its default setting.
CMOS JP5
Chapter 1 Hardware Configuration 9