Advertisement
Quick Links
Advertisement
Related Manuals for Ursalink UC11-T1
Summary of Contents for Ursalink UC11-T1
- Page 1 UC11-T1 Quick Start Guide Ursalink Technology Co., Ltd.
-
Page 2: Related Documents
Thank you for choosing Ursalink UC11-T1. This guide describes how to install the UC11-T1 and how to connect it to Ursalink Cloud. Once you complete the installation, refer to the Ursalink UC11-T1 User Guide for instructions on how to perform configurations on the device. -
Page 3: Usb Configuration
Ursalink UC11-T1 Quick Start Guide 1. Packing List Before you begin to install the UC11-T1, please check the package contents to verify that you have received the items below. 1 × UC11-T1 Device 1 × Magnet Setscrews 1 × Warranty Card If any of the above items is missing or damaged, please contact your Ursalink sales representative. - Page 4 Ursalink UC11-T1 Quick Start Guide D. After configuration, put back the roof C. Connect UC11-T1 to Laptop with standard cover and screw the screws. USB cable. Configure UC11-T1 via Ursalink Toolbox. 2.3 Mount the UC11-T1 A. Use 2 pcs of flat head Phillips screws to fix B.
- Page 5 A. Connect PC and UC11-N1 directly via USB port as shown in Section 2.2. B. Download Toolbox software from Ursalink website and open Toolbox.exe. Select correct Serial Port fill in the password to log in. (Default password: 123456) Toolbox Download link: https://www.ursalink.com/en/software-download/...
- Page 6 Ursalink UC11-T1 Quick Start Guide D. Click “LoRaWAN” to configure the related parameters and save configurations. The “Join type” must be OTAA if you connect UC11-T1 to Ursalink Cloud. Note: Default LoRaWAN parameters: Device EUI 24E1+SN APP EUI 24E1+24C0002A0001 App Port...
- Page 7 Ursalink UC11-T1 Quick Start Guide B. Enable “Ursalink” type network server and “Ursalink Cloud” mode. www.ursalink.com...
- Page 8 Ursalink UC11-T1 Quick Start Guide 3.3 Ursalink Cloud Configuration A. Register and log in Ursalink Cloud. Ursalink Cloud URL: https://cloud.ursalink.com/login.html B. Go to “My Devices->Gateway” and click “Add” to add gateway to Ursalink Cloud via SN. www.ursalink.com...
- Page 9 Go to “Device->My Devices” and click “Add Device”. Fill in the SN of UC11-N1 and select associated gateway. After T1 is connected to Ursalink Cloud, Click or “History Data” to check the UC11-T1 data on Ursalink cloud. Note: For More details, please refer to the UC11-T1 User Guide.
Need help?
Do you have a question about the UC11-T1 and is the answer not in the manual?
Questions and answers