Intercom Within The Same Apartment; Button For Receiving Calls From The Apartment Front Door - golmar T-540 PLUS SE User Manual

T-540 PLUS SE TELEPHONE
OPTIONAL CONNECTIONS
Continued from previous page.
Intercom between two points in the same apartment:
The T-540 Plus SE telephone features as standard an intercom function between two points in the same apartment.
To enable this feature, the following is necessary:
- One of the telephones needs to be configured as master and the other as slave with intercom, as described on
p. 7. In the case of intercom between a monitor and a telephone, it is recommended to configure the monitor as
the master.
- The INT terminal of the intercom devices needs to be connected (see diagram attached).
To use the intercom function to call all of the telephones in the apartment, lift the handset and press and hold down
button until a confirmation tone can be heard. To call individual devices, press the button once to call the
" master telephone, twice to call slave 1 , 3 times to call slave 2 , 4 times to call slave 3 and 5 times to call "
" slave 4 This selective intercom call mode is only available with the T-540 Plus SE telephone. This only ".
functions if no call or communication is in progress. A number of audible tones emitted by the handset will confirm
that the call is being made or that the unit being called is in communication with the door panel. To establish
communication, lift the handset of the unit being called. If a call is received from the door panel during an intercom
process, the handset of the master unit will emit a number of audible tones. To establish communication with the
door panel, press button
door.
The ringtones vary depending on where the call is being made from, enabling the user to identify its origin.
Note: If the apartment also has T-540 Plus telephones, the T-540 Plus SE telephones must be configured as
" Intercom with Plus telephones / monitors (see p. 9). This configuration mode does not allow selective intercom
calls to different telephones in the apartment; when the intercom button is pressed, all of the telephones in the
apartment will receive the call.

Button for receiving calls from the apartment front door:

The T-540 Plus SE telephone features as standard the ability to receive calls from the apartment front door. This
feature precludes the need to use the bell by positioning a switch between terminals HZ— and — of the
telephone.
The ringtones vary depending on where the call is being made from, enabling the user to identify its origin. If a call is
made from the apartment front door during a conversation with the door panel, the handset will emit a number of
tones to indicate so.
.
Note: Regardless of the volume set for the telephone's ringtones (see p. 5) and the night mode function, the
" apartment front door call ringtone will always sound at the highest level.
" "
on the unit configured as master or press the door release button to simply open the
"
T-540 Plus SE
+ _
A D INT
"
T-540 Plus SE
-
" "
T-540 Plus SE
+ _
A D INT
HZ-
" "
" " " "
" "
Continued overleaf
12