Adjusting The Door Panel Call Time; Men 4; Setting All Of The Telephone's Advanced Programming Options To The Default Value - golmar T-540 PLUS SE User Manual

T-540 PLUS SE TELEPHONE
PROGRAMMING THE TELEPHONES
Continued from previous page
-

Adjusting the door panel call time:

"
To adjust the door panel call time: Each press on button
seconds, 2): 45 seconds, 3): 60 seconds, and 4: 90 seconds), which is indicated with blinks (1 to 4
blinks) of the status LED and in the following order: 1, 2, 3 and 4 repeats. When the final selection is
reached, the following press returns the user to the first selection and the status LED blinks once
(carousel mode).
- Accessing Menu 4 or exiting programming mode: "
To access
To exit programming mode, press button
(see p. 10).

Men 4:

u
Then adjust the settings as required:
- Setting all of the telephone's advanced programming options to the "
To set to the default value : Press button
that all of the options of the telephone's advanced programming (p. 8-10) are set to their default
value.
- Button has no function.
Reserved.
- Button has no function.
No function.
- Accessing Menu 1 or exiting programming mode: "
To access
To exit programming mode, press button
- Turning on the telephone when exiting programming:
When exiting advanced programming mode, the telephone will be turned off: Press button
3 seconds to turn the telephone back on. After any resetting of the telephone and for the following
45 seconds, no operation with it can be performed.
45 seconds (default setting)
"
" "
"
" Menu 4 , " press button
" "
"
" Menu 1 ", press button
.
selects a door panel call duration (1: 30
, and the status LED will blink 4 times.
for 3 seconds, and the status LED will turn off
default value .
, and the telephone will indicate with two audible tones
, and the status LED will blink once (see p. 8).
for 3 seconds, and the status LED will turn off.
"
10
for