Men 2; Intercom With Plus Telephones / Monitors; Changing The Function Of Button; Men 3 - golmar T-540 PLUS SE User Manual

T-540 PLUS SE TELEPHONE
PROGRAMMING THE TELEPHONES
Continued from previous page
- Accessing Menu 2 or exiting programming mode: "
To access Menu 2 , press button
To exit programming mode, press button
(see p. 10).
Menu 2:
Then adjust the settings as required:
- Intercom with Plus telephones / monitors: Intercom with Plus SE telephones / monitors (default setting).
If an apartment has T-540 Plus telephones, Tekna Plus monitors and T-540 Plus SE telephones, the T-540 Plus SE
telephones must be configured in Intercom with Plus telephones / monitors mode, as T-540 Plus telephones and
Tekna Plus monitors do not allow an intercom call to a particular telephone / monitor in the apartment to be made.
That way, when an intercom call is made, all of the monitors / telephones in the apartment will receive the call.
To activate the Intercom with Plus telephones / monitors mode: Press button
will indicate with 1 blink that the function is in Intercom with Plus telephones / monitors mode or
with 2 blinks that the function is in Intercom with Plus SE telephones / monitors mode.
-

Changing the function of button

Select the function to assign to button
is indicated with blinks (1 to 4 blinks) of the status LED and in the following order: A1 auxiliary
device activation, call to secondary guard unit, auto switch-on and intercom. When the final
selection is reached, the following press returns the user to the first selection and the status LED
blinks once (carousel mode).
- Changing the function of button
Select the function to assign to button
is indicated with blinks (1 to 4 blinks) of the status LED and in the following order: A1 auxiliary
device activation, call to secondary guard unit, auto switch-on and intercom. When the final
selection is reached, the following press returns the user to the first selection and the status LED
blinks once (carousel mode).
- Accessing Menu 3 or exiting programming mode: "
To access
To exit programming mode, press button
(see p. 10).
Menu 3:
Then adjust the settings as required:
- Repeating the ringtones: One repeat (default setting).
To repeat the ringtone on the telephone: Each press on button "
which is indicated with blinks (1 to 3 blinks) of the status LED and in the following order: 1, 2 or 3
repeats. When the final selection is reached, the following press returns the user to the first
selection and the status LED blinks once (carousel mode).
-

Adjusting the door panel communication time :

"
To adjust the door panel communication time : Each press on button
communication duration (1:60 seconds, 2: 90 seconds, 3): 120 seconds, and 4: 150 seconds),
which is indicated with blinks (1 to 4 blinks) of the status LED and in the following order: 1, 2, 3 and 4
repeats. When the final selection is reached, the following press returns the user to the first
selection and the status LED blinks once (carousel mode).
"
" "
"
"
: Intercom function (default setting).
: A " 1"
"
" Menu 3 , " press button
"
"
, and the status LED will blink twice.
for 3 seconds, and the status LED will turn off
"
"
"
: Each press on button
auxiliary device activation function (default setting).
: Each press on button
, and the status LED will blink 3 times.
for 3 seconds, and the status LED will turn off
" 90 seconds (default setting).
"
"
, and the status LED
"
selects a different function which
selects a different function which
selects a repeat of the ringtones
selects a door panel
Continued overleaf
9
"
" "
" "