Prepare Lock For Installation - Cal-Royal CR9000 Installation And Programming Instructions

Step #3 Prepare Lock for Installation
A. Unpack the Lock
The lock is packed in such a way to represent how it will install on the door.
Before installation:
1. Disassemble the inside escutcheon.
1) Remove the inside lever and spacer bushing with the lever removal tool provided.
2) Separate the mounting plate from the inside escutcheon.
2. Remove the battery cover
1) Unscrew the battery cover screw using the ＃2 phillips screw driver.
2) Take the battery cover off.
The outside assembly stays assembled.
1. Mounting Plate
2. Mounting Plate Screws
B. Adjust for Door Thickness (If Necessary)
F Lock is factory-assembled for 1-3/4"(45㎜) thick doors.
F It can be adjusted for door thickness range from 1-3/8"(35㎜).
Installation and Programming Instructions for Electronic Stand-Alone Cylindrical Locks
3. Inside Escutcheon
4. Inside Escutcheon Screw
- 7 -
5. Battery Cover
6. Battery Cover Screw
7. Spacer Bushing
8. Inside Lever