Click Codes Of The Controller - OMT FREE.STAND 9051 Installation And Operating Instructions Manual

10 Click codes of the controller

As soon as the motor controller is supplied with power, the controller uses the integrated relay to acoustically
inform the user about the system status and the reason for the most recent shut-down.
Click = Relay actuated, Clack = Relay dropping
Number When
of click-
clacks
1x If the mains is on
1x Up key pressed
7x During the movement, the connection to
a drive is lost.
2x Setting a container- or shelf-stop
4x Delete container- or shelf-stop.
7x Table moves at an angle
9051_Bedienungsanleitung_C1_Rev2_EN_UK – Stand 08.08.2018 TS / MB
Status Information
Normal operation: The system works without any
problem.
Reset: Initialisation movement required
Error: Table cannot be moved any more
Confirmation of the limit position having been
successfully saved
(only with the simple hand switch without a display)
Confirmation of the limit position having been
successfully deleted.
(only with the simple hand switch without a display)
Error: The drives do not have the same height,
initialisation movement required
24