OMT FREE.STAND 9051 Installation And Operating Instructions Manual page 23

Note: If there is a power failure during the height adjustment or if the mains cable is pulled, a
manual reset might be necessary.
If the error cannot be repaired as described above, pull the mains plug, wait for several minutes and try to
reinitialise the desk.
If the error continues to occur, unplug the desk from the mains and contact customer service.
This error list refers to firmware A1.2 and higher.
9051_Bedienungsanleitung_C1_Rev2_EN_UK – Stand 08.08.2018 TS / MB
23