Preface; Use As Intended; Target Group And Previous Knowledge - OMT FREE.STAND 9051 Installation And Operating Instructions Manual

1

Preface

Dear customer,
We are pleased that you have decided to purchase our product. These instructions explain how to assemble,
use and maintain the sit/stand desk. All sit/stand desks are put through a thorough quality inspection before
leaving our factory. If you ever have any problems with our desk base, feel free to contact our service
department any time.
It is important to follow these instructions when assembling the desk base. Any changes on the desk base or an
improper usage can have an effect on the safety, functioning and service life!
These operating instructions are intended for all sit/stand desks from the 9051 FREE.STAND system with the
STAND.CONTROL C1 motor controller but, due to different versions/types, can deviate from the illustrations.
Oelschläger Metalltechnik GmbH

1.1 Use as intended

This sit/stand desk may be used solely as an office desk in the professional sector. Changes to the desk base
are prohibited. This sit/stand desk must be assembled, put into operation and functionally checked by skilled
personnel. The use of this sit/stand desk for any purpose other than the purpose stated above is only
permissible with the consent of Oelschläger Metalltechnik GmbH.
The basic function of the desk is the electromotive height adjustment of the desktop. This function can be
performed with all hand-switches that are available from us.

1.2 Target group and previous knowledge

These operating instructions are aimed at the following group of persons:
•
The commissioning staff who assembles and commissions the sit/stand desks.
•
Furniture installers, maintenance staff who commission the sit/stand desk in sales rooms or at the final
customer.
The following knowledge is required to commission and assemble the FREE.STAND sit/stand desk:
• Mechanical and electrical basic knowledge (corresponding illustration)
• Reading the instructions
9051_Bedienungsanleitung_C1_Rev2_EN_UK – Stand 08.08.2018 TS / MB
4