Instrument Errors - Physiomed HIVAMAT 200 Operating Instructions Manual

PHYSIOMED ELEKTROMEDIZIN AG
Changing the Membrane - Inserting
(3) Press the oscillator plate firmly onto the foam rubber area of the membrane until the clamping ring
engages with the oscillator plate. Make sure that the foil is tightly fixed with the clamping ring on the
outside, and that the clamping ring is engaged!
Changing the Membrane - Engaging the Oscillator Plate

3.6 Instrument Errors

If a functional error is detected during the automatic self-test routine or during operation, a special error
code is displayed on the display. In this case, massage is automatically interrupted.
To check whether the instrument operates properly, execute the self-test as described in
on page 10. If an error code is still displayed after several repeated self-test routines, contact your technic-
al service.
Important
Do not try repairing the instrument yourself! Only authorized personnel should open the in-
strument (refer to
12
Customer Service, Maintenance, Service
3 Instrument Operation
Function Check
on page 16).
®
HIVAMAT 200